another great product from ERP. - #1 Car Club In Kitchener - Waterloo - Cambridge

**2point2** · 02-13-2005, 09:42 PM

pics of b16crx's tranny mount.

mounts were purchased at ERP. looks like they're still learning how to weld.

It's a good thing his LSD tranny and axle kept the motor from falling out of the engine bay. to bad it fucked up the whole tranny and bent the axle while it did that...

man, I thought last winter was the last time i'd be posting about the BS that ERP sells/makes.. unfortunantly these mounts were baught a while before it was determined that ERP sells junk, makes junk and is an un-professionally run business.

there was almost to penetration on the round part of this mount.. and there is more porosity than an arrow bar..

i just hope no one on VM goes to this shop.. especially because the sponsors on here have generally a good rep (and i'm a tough critic..:tounge: )

for the record.. i really dont like posting these kinds of theads. I could post a shop horror story once a week if i wanted to (as could many other people).. but this one stood out.

**Sharpe** · 02-13-2005, 09:49 PM

wow that s terrible

**2point2** · 02-13-2005, 09:51 PM

Quote:

Originally Posted by UberHatch

wow that s terrible

yeah.. and the car was hardly driven............. AND the lsd had a fresh rebuild. usually you dont expect your mounts (of all things) to fuck your tranny up...

**vwguy** · 02-13-2005, 11:05 PM

Was that from your car ??

Did they give you warranty ??

**2point2** · 02-13-2005, 11:22 PM

reading owns you nick..haha

it was from b16crx's car.. they are hasport (old style) copies.

my mounts are mild steel and are welded with a good amount of overkill - i had them welded right infront of me by someone i trust - good welder and some good passes.

i think ERP uses osme kind of add on kit for mig welders to weld aluminum with... obviously is not ment for anything structural..

warantee was never discussed.. you'd think the business would be so concered with the result of a mount breaking that they would take the time to get it welded properly. that wasn't the case.

oh.. and the last time we went to ERP to discuss something the cops almost had to be called. as soon as we walked in there was 2 guys looking for a fight (seriously) <-- same thing happend to anoter buddy of mine who had an issue with something.

maybe b16crx will get someone (who knows how to weld!!) to fix/beef up the mouns?

bunch of monkeys they is.

**SiGuy** · 02-13-2005, 11:30 PM

glad noone got hurt from this

**vwguy** · 02-13-2005, 11:42 PM

Quote:

Originally Posted by 2point2

reading owns you nick..haha

it was from b16crx's car.. they are hasport (old style) copies.

I read that as they were mounts for a b16 in a CRX. , but since you have an H22 i got confused

Either way any shop that has employees looking for a fight when you walk in should not exist.

**2point2** · 02-14-2005, 12:11 AM

Quote:

Originally Posted by vwguy

Either way any shop that has employees looking for a fight when you walk in should not exist.

lol.. i'm surprised that ERP still exists.... actually.. i'm not even sure if they do...??

anyone know?

**Boosted Spyder** · 02-14-2005, 03:35 AM

ya they are on industrial rd across from napa

**sircrxracer** · 02-14-2005, 09:30 AM

This has happend to my brothers CRX, Bruno's street CRX, Kevin's Civic..... the ones Learch (Chris) has look like they were welded by a 10year old
Mike I don't know why you would have even put those dam things in you car there not worthy...... get the new hasports

Rob

**sircrxracer** · 02-14-2005, 09:31 AM

I think this post should be in Local shop talk too! Tob

**SR20DET** · 02-14-2005, 09:51 AM

Quote:

Originally Posted by sircrxracer

I think this post should be in Local shop talk too! Tob

OK TOB :tounge:

Moved

**TYM2PLAY** · 02-14-2005, 10:44 AM

I can 't believe that people take there cars to those hack artists, someone is going to get seriously injured by getting work done there

**sevsev** · 02-14-2005, 10:47 AM

Sorry but, ERP?? something performance?

**2point2** · 02-14-2005, 01:04 PM

Quote:

Originally Posted by sevsev

Sorry but, ERP?? something performance?

Evans Race Products.

for all your single cam needs. lol

**AUTHORITY 1** · 02-14-2005, 01:09 PM

dont you mean single cam dreams

**2point2** · 02-14-2005, 01:20 PM

Quote:

Originally Posted by AUTHORITY 1

dont you mean single cam dreams

lol..

sorry.. but you dont build race cars with single cams unless your bisimoto.

**b16crx** · 02-14-2005, 01:41 PM

I put like 5 total mouths on these mount they also fawk up my axles. I just order a new pair of avid racing mounts from pz . This really suck because a want to build bigger motor this year....b20 vtec or b18c 2L

ERP :fuckyou:

**AUTHORITY 1** · 02-14-2005, 03:10 PM

Ya they really know how to build great SHOW/RACE cars

**b16crx** · 02-14-2005, 03:55 PM

**sircrxracer** · 02-15-2005, 09:07 AM

Quote:

Originally Posted by b16crx

I put like 5 total mouths on these mount they also fawk up my axles. I just order a new pair of avid racing mounts from pz . This really suck because a want to build bigger motor this year....b20 vtec or b18c 2L

ERP :fuckyou:

Mike your car will fly with a bigger bottom end hope you can still do it. Rob

**meancx** · 02-28-2005, 03:31 PM

nothing but horror stories from erp...are they still at industrial drive, they took down there signs and that

02-13-2005, 09:42 PM	#1 (permalink)
2point2 VM Member Posts: 6,508 Join Date: Feb 2004 Ride: 1988 Honda CRX Fav Mod: CRXForum Class:	another great product from ERP. pics of b16crx's tranny mount. mounts were purchased at ERP. looks like they're still learning how to weld. It's a good thing his LSD tranny and axle kept the motor from falling out of the engine bay. to bad it fucked up the whole tranny and bent the axle while it did that... man, I thought last winter was the last time i'd be posting about the BS that ERP sells/makes.. unfortunantly these mounts were baught a while before it was determined that ERP sells junk, makes junk and is an un-professionally run business. there was almost to penetration on the round part of this mount.. and there is more porosity than an arrow bar.. i just hope no one on VM goes to this shop.. especially because the sponsors on here have generally a good rep (and i'm a tough critic..:tounge: ) for the record.. i really dont like posting these kinds of theads. I could post a shop horror story once a week if i wanted to (as could many other people).. but this one stood out. ------------------ 2.2L Turbo CRX - 10.73 @ 137mph - Pump gas, and then drove it home.

02-13-2005, 09:49 PM	#2 (permalink)
Sharpe VM Member Posts: 1,170 Location: Niagara Join Date: Apr 2004 Ride: GT3 RS Fav Mod: Class:	wow that s terrible ------------------ Formerly known as Uberhatch I haven't failed, I have only found 10,000 ways that don't work

02-13-2005, 11:05 PM	#4 (permalink)
vwguy VM Founder & Moderator Posts: 15,577 Location: Waterloo, Ontario Join Date: Nov 2003 Ride: 2001 VW Golf 1.8T Fav Mod: CF Hatch Class: All Out	Was that from your car ?? Did they give you warranty ?? ------------------ Nick \| 2001 Golf 1.8T \| www.mygolfiv.com \| www.hpaddicts.com \| Need Cheap Hosting ?? www.WEJhosting.com $50/Year

02-13-2005, 11:22 PM	#5 (permalink)
2point2 VM Member Posts: 6,508 Join Date: Feb 2004 Ride: 1988 Honda CRX Fav Mod: CRXForum Class:	reading owns you nick..haha it was from b16crx's car.. they are hasport (old style) copies. my mounts are mild steel and are welded with a good amount of overkill - i had them welded right infront of me by someone i trust - good welder and some good passes. i think ERP uses osme kind of add on kit for mig welders to weld aluminum with... obviously is not ment for anything structural.. warantee was never discussed.. you'd think the business would be so concered with the result of a mount breaking that they would take the time to get it welded properly. that wasn't the case. oh.. and the last time we went to ERP to discuss something the cops almost had to be called. as soon as we walked in there was 2 guys looking for a fight (seriously) <-- same thing happend to anoter buddy of mine who had an issue with something. maybe b16crx will get someone (who knows how to weld!!) to fix/beef up the mouns? bunch of monkeys they is. ------------------ 2.2L Turbo CRX - 10.73 @ 137mph - Pump gas, and then drove it home.

02-13-2005, 11:30 PM	#6 (permalink)
SiGuy VM Member Posts: 1,675 Location: Woodstock Join Date: Mar 2004 Ride: 2006 350z Fav Mod: Class: Street	glad noone got hurt from this ------------------ http://www.cardomain.com/id/siguy -\|[ 5thgen crew ]-\| member# 002 \|-

02-14-2005, 03:35 AM	#9 (permalink)
Boosted Spyder VM Member Posts: 264 Location: cambridge Join Date: Feb 2005 Ride: 1998 mitsubishi eclipse spyder gs-t Fav Mod: none done Class: Street	ya they are on industrial rd across from napa

02-14-2005, 09:30 AM	#10 (permalink)
sircrxracer VM Member Posts: 1,486 Location: K-town Join Date: Feb 2004 Ride: 90 Honda CRX Fav Mod: Header Class: Strip	This has happend to my brothers CRX, Bruno's street CRX, Kevin's Civic..... the ones Learch (Chris) has look like they were welded by a 10year old Mike I don't know why you would have even put those dam things in you car there not worthy...... get the new hasports Rob ------------------ 2004 CSCS points runner-up 90 CRX- 12.0 @ 113 street car all motor 4 banger!!! Yea my kids are proud!

02-14-2005, 09:31 AM	#11 (permalink)
sircrxracer VM Member Posts: 1,486 Location: K-town Join Date: Feb 2004 Ride: 90 Honda CRX Fav Mod: Header Class: Strip	I think this post should be in Local shop talk too! Tob ------------------ 2004 CSCS points runner-up 90 CRX- 12.0 @ 113 street car all motor 4 banger!!! Yea my kids are proud!

02-14-2005, 10:44 AM	#13 (permalink)
TYM2PLAY Regular User Posts: 301 Location: ON YOUR MOM Join Date: Jan 2005 Ride: Fav Mod: Class:	I can 't believe that people take there cars to those hack artists, someone is going to get seriously injured by getting work done there

02-14-2005, 10:47 AM	#14 (permalink)
sevsev VM Member Posts: 4,259 Location: Cambridge Join Date: May 2004 Ride: 2003 Protege5 Fav Mod: train horn Class: Mini Truck	Sorry but, ERP?? something performance? ------------------ //Andrew \| 03 Mazda Protege5 3:13

02-14-2005, 01:09 PM	#16 (permalink)
AUTHORITY 1 VM Member Posts: 762 Join Date: Jul 2004 Ride: 1989 HONDA CRX SI Fav Mod: Class:	dont you mean single cam dreams

02-14-2005, 01:41 PM	#18 (permalink)
b16crx VM Member Posts: 112 Location: cambrigde Join Date: Feb 2004 Ride: 1990 CRX SC Fav Mod: Class:	I put like 5 total mouths on these mount they also fawk up my axles. I just order a new pair of avid racing mounts from pz . This really suck because a want to build bigger motor this year....b20 vtec or b18c 2L ERP :fuckyou: ------------------ 90 crx jrsc gsr 8psi 220whp 171 wtq 12.9 @ 109mph 1.88 60ft 93 eg beater

02-14-2005, 03:10 PM	#19 (permalink)
AUTHORITY 1 VM Member Posts: 762 Join Date: Jul 2004 Ride: 1989 HONDA CRX SI Fav Mod: Class:	Ya they really know how to build great SHOW/RACE cars

02-14-2005, 03:55 PM	#20 (permalink)
b16crx VM Member Posts: 112 Location: cambrigde Join Date: Feb 2004 Ride: 1990 CRX SC Fav Mod: Class:	------------------ 90 crx jrsc gsr 8psi 220whp 171 wtq 12.9 @ 109mph 1.88 60ft 93 eg beater

02-28-2005, 03:31 PM	#22 (permalink)
meancx Has To Squint To Read His Custom Title Posts: 1,013 Location: waterloo Join Date: Aug 2004 Ride: 1988 mustang Fav Mod: turbo coupe go fast Class: Street	nothing but horror stories from erp...are they still at industrial drive, they took down there signs and that ------------------ psa makes richard simmons look straight!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode