RPM Motorsports Grand Opening - Saturday May 5th - #1 Car Club In Kitchener - Waterloo - Cambridge

**R.P.M.** · 04-18-2007, 11:47 PM

Hey Everyone,

Figured I'd post this here too

I just noticed that there is a cruise going on in Barrie the same day as our Grand Opening, so I hope not to take people away from the cruise but for those who aren't wanting to make the drive to Barrie that day, you should stop by our new shop location and get a free burger!

Me (Joe) and Dan are inviting everyone to the new shop location for our "Grand Opening" on Saturday May 5th from 10am-until when ever everyone leaves!

We will be BBQ'ing some burgers and hot dogs in the afternoon and anyone is more than welcome to stop by, hang out, talk cars, check out some of the projects we have going on and maybe learn a few things.

Let me know here if you can make it so I know how many burgers to get.

Our new location is:

250 Woolwich St S Unit #12
Breslau Ont
N0B 1M0

Although it looks like we only work on RX-7's, its just my specialty. We have another friend of ours who helps us out after hours working on anything else, he know's his Honda's really well and will be fully licenced in June.
Heres a few pics from around the shop:

Hope to see you there!

**Pharaoh** · 04-18-2007, 11:55 PM

What kind of work do you guys do?

Is it all body work?

**R.P.M.** · 04-19-2007, 12:05 AM

No, we dont get into body work at all...

I specialize in rebuilding/porting Rotary engines. Also custom turbo setups, building race cars from ground up, getting more into fabrication now that we have a new TIG welder! We offer powder coating and ceramic coating as well, along with the retail side of things, selling new parts like Greddy, Turbosmart, Yonaka Products, Raceonusa bodykits ect ect.

I've been working on RX-7 and rotaries since I've been 13, so RX-7's is what I know. As for the piston engine cars, our buddy Dave helps us out with them.

I'm UBER busy right now trying to get some of project cars out of the way for our opening, but we can always take the time to talk about cars and any setups someone wants to try with thier car.

BTW, if anyone is planning on showing up for the BBQ, make sure your car is nice and shined up....we may have a camera crew here that day filming for a DVD!

**R.P.M.** · 04-19-2007, 12:07 AM

LOL, I just looked at the pics I posted up.....most of the cars look like they are getting bodywork done hahaa, no wonder you thought we did body work!

**MX3** · 04-19-2007, 12:23 AM

Do you also import engines?

**Pharaoh** · 04-19-2007, 01:07 AM

Quote:

Originally Posted by R.P.M.

LOL, I just looked at the pics I posted up.....most of the cars look like they are getting bodywork done hahaa, no wonder you thought we did body work!

lol, ya that is why I asked...

Do you guys do suspension as well?

**MX3Autozam** · 04-19-2007, 01:11 AM

Oh My God, Theres Mazda Rotary freaks in this area that have a shop.'m so gunna come get a free burger from you guys and check out your stuff. I may also be interested in powder coating some things. I will let you know.

Take care

**HEVNSNT** · 04-19-2007, 07:50 AM

Quote:

Originally Posted by MX3Autozam

Oh My God, Theres Mazda Rotary freaks in this area that have a shop.'m so gunna come get a free burger from you guys and check out your stuff. I may also be interested in powder coating some things. I will let you know.

Take care

No doubt, finally some rotaries to represent the k dub.

We'll see you there Joe.

**mazdaspeedpower** · 04-19-2007, 08:07 AM

Mazda love, I will be there man.

Do you know anything about the FS-DE and the turbo setup on the MSProtege? if so, we'll be talking

**R.P.M.** · 04-19-2007, 06:06 PM

Quote:

Originally Posted by MX3

Do you also import engines?

We dont import engines ourselves, we buy from importers in Toronto. But if you want us to look for something in particular we can try helping you out.

Pharaoh - What do you mean suspention? We can get mostly anything and install if thats what you meant?

mazdaspeedpower - I'm not too familiar with the MS Protege, but I'm a quick learner! What would you like to know?

**Pharaoh** · 04-19-2007, 06:11 PM

That is what I was wondering, if you guys do shocks, struts, springs, camber kits?

**meancx** · 04-19-2007, 07:02 PM

where is the shop, i went for a little tour today coming from cambridge and couldnt find it

**khunt0012** · 04-19-2007, 07:08 PM

Ah yes, Ryan was telling me about you guys, he said I should drop by and check out the shop. I might just have to do that.

**R.P.M.** · 04-19-2007, 08:21 PM

Quote:

Originally Posted by meancx

where is the shop, i went for a little tour today coming from cambridge and couldnt find it

We're in Breslau on the main street, just north of the smelly Safety Kleen plant on the west side of the street. In the same building as XDG Construction, Unit # 12.

We dont have any signs up yet, but hoping to get them up before the end of the month.

Feel free to stop by anytime!

**Trance|Ghost** · 04-22-2007, 11:58 AM

shop is very hidden, I sat in that red rx-7 and almost died sitting in it, wow.. such beautiful cars in that shop!

I'll def be there!

**HEVNSNT** · 04-23-2007, 06:16 AM

Quote:

Originally Posted by Trance|Ghost

wow.. such beautiful cars in that shop!

Really? I didn't see and LS1's in there?

**weiRtech** · 04-23-2007, 11:42 AM

looks like a nice big space. good luck with your endeavour!

**Trance|Ghost** · 04-23-2007, 12:31 PM

Quote:

Originally Posted by HEVNSNT

Really? I didn't see and LS1's in there?

ha, ha, ha.

**2point2** · 04-23-2007, 05:34 PM

Are you putting a rotery in the riding lawn mower?

**R.P.M.** · 04-29-2007, 01:42 AM

Quote:

Originally Posted by 2point2

Are you putting a rotery in the riding lawn mower?

Hahaha no thats the shops "tow vehicle"....but you should see the racing lawnmower our co-op student is building

It was originally an 8hp rider, he's stuffing a 27hp V-twin in it.....hes nuts.

**HEVNSNT** · 05-04-2007, 07:22 AM

Just a reminder that this is tomorrow.

**mazdaspeedpower** · 05-04-2007, 08:21 AM

Quote:

Originally Posted by R.P.M.

mazdaspeedpower - I'm not too familiar with the MS Protege, but I'm a quick learner! What would you like to know?

Question is what do you want to know? On paper I pretty much know every part of the car, and am learning the hands on part slowly. Mazda's are ALOT more complicated than my little J-body, holy fuck.

04-18-2007, 11:47 PM	#1 (permalink)
R.P.M. VM Member Posts: 62 Location: K-W Join Date: Feb 2007 Ride: Anything Rotary Fav Mod: Cutting wastegate line! Class:	RPM Motorsports Grand Opening - Saturday May 5th Hey Everyone, Figured I'd post this here too I just noticed that there is a cruise going on in Barrie the same day as our Grand Opening, so I hope not to take people away from the cruise but for those who aren't wanting to make the drive to Barrie that day, you should stop by our new shop location and get a free burger! Me (Joe) and Dan are inviting everyone to the new shop location for our "Grand Opening" on Saturday May 5th from 10am-until when ever everyone leaves! We will be BBQ'ing some burgers and hot dogs in the afternoon and anyone is more than welcome to stop by, hang out, talk cars, check out some of the projects we have going on and maybe learn a few things. Let me know here if you can make it so I know how many burgers to get. Our new location is: 250 Woolwich St S Unit #12 Breslau Ont N0B 1M0 Although it looks like we only work on RX-7's, its just my specialty. We have another friend of ours who helps us out after hours working on anything else, he know's his Honda's really well and will be fully licenced in June. Heres a few pics from around the shop: Hope to see you there! ------------------ www.rpmmotorsports.ca Specializing in Mazda's

04-18-2007, 11:55 PM	#2 (permalink)
Pharaoh I Do Not Live In A Pyramid!! Posts: 1,580 Location: Kitchener, Ontario Join Date: Apr 2005 Ride: 2000 Mitsubishi Eclipse GS Fav Mod: Custom Stereo Class: Street	What kind of work do you guys do? Is it all body work? ------------------ www.psaclub.net Power<>Style<>Autosport

04-19-2007, 12:05 AM	#3 (permalink)
R.P.M. VM Member Posts: 62 Location: K-W Join Date: Feb 2007 Ride: Anything Rotary Fav Mod: Cutting wastegate line! Class:	No, we dont get into body work at all... I specialize in rebuilding/porting Rotary engines. Also custom turbo setups, building race cars from ground up, getting more into fabrication now that we have a new TIG welder! We offer powder coating and ceramic coating as well, along with the retail side of things, selling new parts like Greddy, Turbosmart, Yonaka Products, Raceonusa bodykits ect ect. I've been working on RX-7 and rotaries since I've been 13, so RX-7's is what I know. As for the piston engine cars, our buddy Dave helps us out with them. I'm UBER busy right now trying to get some of project cars out of the way for our opening, but we can always take the time to talk about cars and any setups someone wants to try with thier car. BTW, if anyone is planning on showing up for the BBQ, make sure your car is nice and shined up....we may have a camera crew here that day filming for a DVD! ------------------ www.rpmmotorsports.ca Specializing in Mazda's

04-19-2007, 12:07 AM	#4 (permalink)
R.P.M. VM Member Posts: 62 Location: K-W Join Date: Feb 2007 Ride: Anything Rotary Fav Mod: Cutting wastegate line! Class:	LOL, I just looked at the pics I posted up.....most of the cars look like they are getting bodywork done hahaa, no wonder you thought we did body work! ------------------ www.rpmmotorsports.ca Specializing in Mazda's

04-19-2007, 08:07 AM	#9 (permalink)
mazdaspeedpower Trippin' Balls Due To Mazda's Speed Posts: 1,082 Location: Kitchener Join Date: Aug 2005 Ride: 2003.5 Mazdaspeed Protege Fav Mod: Spec Stage 3 Clutch Class: Street	Mazda love, I will be there man. Do you know anything about the FS-DE and the turbo setup on the MSProtege? if so, we'll be talking ------------------ 2003.5 Titanium Grey Mazdaspeed Protege-2.0L 5spd Turbo 1996 Cavalier-2.2L 3psd(AT)

04-19-2007, 12:23 AM	#5 (permalink)
MX3 VM Member Posts: 8 Location: Waterloo Join Date: May 2006 Ride: 95 Mazda mx-3 Fav Mod: Class:	Do you also import engines?

04-19-2007, 01:11 AM	#7 (permalink)
MX3Autozam VM Member Posts: 3,013 Location: Cambridge, Ontario Join Date: May 2004 Ride: 93 MX3 Precidia Fav Mod: KLZE,Greddy Exhaust Class: Strip	Oh My God, Theres Mazda Rotary freaks in this area that have a shop.'m so gunna come get a free burger from you guys and check out your stuff. I may also be interested in powder coating some things. I will let you know. Take care

04-19-2007, 06:11 PM	#11 (permalink)
Pharaoh I Do Not Live In A Pyramid!! Posts: 1,580 Location: Kitchener, Ontario Join Date: Apr 2005 Ride: 2000 Mitsubishi Eclipse GS Fav Mod: Custom Stereo Class: Street	That is what I was wondering, if you guys do shocks, struts, springs, camber kits? ------------------ www.psaclub.net Power<>Style<>Autosport

04-19-2007, 07:02 PM	#12 (permalink)
meancx Has To Squint To Read His Custom Title Posts: 1,012 Location: waterloo Join Date: Aug 2004 Ride: 1988 mustang Fav Mod: turbo coupe go fast Class: Street	where is the shop, i went for a little tour today coming from cambridge and couldnt find it ------------------ psa makes richard simmons look straight!!!

04-19-2007, 07:08 PM	#13 (permalink)
khunt0012 VM Member Posts: 2,378 Location: At the Bar Join Date: Dec 2004 Ride: 1994 Honda Accord / 1991 Honda Civic Si Fav Mod: H22 Swap Class: Street	Ah yes, Ryan was telling me about you guys, he said I should drop by and check out the shop. I might just have to do that. ------------------ Kyle 1994 Honda Accord EX H22 - Summer 1991 Honda Civic Si - Winter

04-22-2007, 11:58 AM	#15 (permalink)
Trance\|Ghost VM Member Posts: 950 Location: Kitchener Join Date: Oct 2005 Ride: 1992 Topaz XR5 Fav Mod: its stock. Class:	shop is very hidden, I sat in that red rx-7 and almost died sitting in it, wow.. such beautiful cars in that shop! I'll def be there! ------------------ That's not oil leaking! It's sweat, from all that horsepower! _________________ www.psaclub.net Power<>Style<>Autosport

04-23-2007, 11:42 AM	#17 (permalink)
weiRtech VM Member Posts: 350 Location: waterdown Join Date: Jul 2005 Ride: 1989 Honda CRX Fav Mod: Class:	looks like a nice big space. good luck with your endeavour!

04-23-2007, 05:34 PM	#19 (permalink)
2point2 VM Member Posts: 6,508 Join Date: Feb 2004 Ride: 1988 Honda CRX Fav Mod: CRXForum Class:	Are you putting a rotery in the riding lawn mower? ------------------ 2.2L Turbo CRX - 10.73 @ 137mph - Pump gas, and then drove it home.

05-04-2007, 07:22 AM	#21 (permalink)
HEVNSNT VM Member Posts: 400 Location: Kitchener Join Date: Aug 2004 Ride: 94 RX7 Fav Mod: Class:	Just a reminder that this is tomorrow.