Robotics/Automation Class of '05 - Team Innomation - #1 Car Club In Kitchener - Waterloo - Cambridge

**2point2** · 08-13-2005, 03:54 AM

Just wanted to share some pics of my 3rd year project. figured there'd be a couple people interested in this kind of stuff...

Every year the R&A students do a group project... "Team Innomation" has 17 members. We are making an assembly line that packages candy in blister packs.. (just like gum!).. we have only $2000 to spend + donations and equipment from past years..

Punch Die cutting paper

Finished product minus the heat seal and a "Paul Fontes Signature Series" alan key.. all sitting on top our pimp die frame. I suck at stick welding.. (MIG was broken)

me and my buddy Brandon built this die. the pictures do not give any justace to the amount of work that went into designing and building this.. (?60 to 80 hours?) In our programe we get only a General Machining credit so I am extreemly proud of this assembly.. we were way over our heads with this... AND IT WORKS

(video link below)

"MODTEK" on the left (the other of two teams) they are making an assembly line to make poker kits.. (more pics below). Someone is about to get a large file across the back.

I swear, this thing will cut your fucking hand off!!

you cant see it.. but in there somewhere is a something to heat and then vacuum forum the blister packs..

another radom pic.. the wires/phnumatics have since been cleaned up.

Cabinet #1. I would get fired if i designed a cabinet like this at work.. LOL.. but it does the job.

Tools used.

.....

we have a broad range of maching skills.....

some pics of "MODTEK" poker kit assembly line.

**vwguy** · 08-13-2005, 07:17 AM

THat is aawsome Paul, my friends did a CD packaging and burning assembly line for last years project. That was just as awsome.

**WRC_VERNA** · 08-13-2005, 08:57 AM

thats amazing... congrats on a great project

**A|eks** · 08-13-2005, 11:13 AM

thats some mad PLCs

Quote:

THat is aawsome Paul, my friends did a CD packaging and burning assembly line for last years project. That was just as awsome.

Whos that? I had 3 friends in that group!

**2point2** · 08-13-2005, 01:08 PM

Thanks for the comments guys.. there is an insane amount of time that goes into these projects - it's nice to hear.

Punch Die cutting paper

dont think the video was working.. but it's fixed now..

**fixitmattman** · 08-13-2005, 04:04 PM

LMAO at Brandon

Owned by no mig welder. That arc welder is a monster :tounge: #1 reason we used my mig for the Baja. Welds look good enough considering.

All ready for Wednesday I take it.

Matt

**RINdetails77** · 08-13-2005, 07:41 PM

THATS SICK :O

**Pheonix** · 08-13-2005, 11:23 PM

jood job

dad says it looks solid too!

(hes department head for PLC Engineering/Robotics at Mohawk College)

**Slawek** · 08-14-2005, 01:23 AM

i did the yo-yo assembly and packaging project in 03'

**2point2** · 08-14-2005, 08:26 PM

Quote:

Originally Posted by Slawek

i did the yo-yo assembly and packaging project in 03'

got any pics?

**neonSRT** · 08-15-2005, 02:06 PM

Looks awesome Paul!

**Slawek** · 08-15-2005, 02:18 PM

honestly, no pics. But I have the finished product at home

As well as the finished products of the other two groups (CD packaging - lame, and film packaging - lame). Seems like everyone "packages" shit, rather than an assembly process.

Boo to you, packagers, boo to you.

**2point2** · 08-27-2005, 02:45 AM

http://www.conestogac.on.ca/met/ra/robotics2005

check out the website..^^

**khunt0012** · 08-27-2005, 08:00 PM

Real cool Paul, keep up the good work. I'm going into to D&A this year but I may switch over to R&A depending on how I like it.

I think a group did a pill packaging plant one year that I saw.

**2point2** · 08-28-2005, 02:29 AM

Quote:

Originally Posted by khunt0012

Real cool Paul, keep up the good work. I'm going into to D&A this year but I may switch over to R&A depending on how I like it.

I think a group did a pill packaging plant one year that I saw.

you will spend a lot more time doing math and 3d CAD in D&A.. in R&A you will do programming/electronics instead.

08-13-2005, 03:54 AM	#1 (permalink)
2point2 VM Member Posts: 6,508 Join Date: Feb 2004 Ride: 1988 Honda CRX Fav Mod: CRXForum Class:	Robotics/Automation Class of '05 - Team Innomation Just wanted to share some pics of my 3rd year project. figured there'd be a couple people interested in this kind of stuff... Every year the R&A students do a group project... "Team Innomation" has 17 members. We are making an assembly line that packages candy in blister packs.. (just like gum!).. we have only $2000 to spend + donations and equipment from past years.. Punch Die cutting paper Finished product minus the heat seal and a "Paul Fontes Signature Series" alan key.. all sitting on top our pimp die frame. I suck at stick welding.. (MIG was broken) me and my buddy Brandon built this die. the pictures do not give any justace to the amount of work that went into designing and building this.. (?60 to 80 hours?) In our programe we get only a General Machining credit so I am extreemly proud of this assembly.. we were way over our heads with this... AND IT WORKS (video link below) "MODTEK" on the left (the other of two teams) they are making an assembly line to make poker kits.. (more pics below). Someone is about to get a large file across the back. I swear, this thing will cut your fucking hand off!! you cant see it.. but in there somewhere is a something to heat and then vacuum forum the blister packs.. another radom pic.. the wires/phnumatics have since been cleaned up. Cabinet #1. I would get fired if i designed a cabinet like this at work.. LOL.. but it does the job. Tools used. ..... we have a broad range of maching skills..... some pics of "MODTEK" poker kit assembly line. ------------------ 2.2L Turbo CRX - 10.73 @ 137mph - Pump gas, and then drove it home.

08-13-2005, 07:17 AM	#2 (permalink)
vwguy VM Founder & Moderator Posts: 15,577 Location: Waterloo, Ontario Join Date: Nov 2003 Ride: 2001 VW Golf 1.8T Fav Mod: CF Hatch Class: All Out	THat is aawsome Paul, my friends did a CD packaging and burning assembly line for last years project. That was just as awsome. ------------------ Nick \| 2001 Golf 1.8T \| www.mygolfiv.com \| www.hpaddicts.com \| Need Cheap Hosting ?? www.WEJhosting.com $50/Year

08-13-2005, 08:57 AM	#3 (permalink)
WRC_VERNA VM Member Posts: 2,742 Location: K-W Join Date: Feb 2005 Ride: 2001 Hyundai Accent Fav Mod: Class: Street	thats amazing... congrats on a great project ------------------ B. 92 Stallions of fury at the flywheel

08-13-2005, 01:08 PM	#5 (permalink)
2point2 VM Member Posts: 6,508 Join Date: Feb 2004 Ride: 1988 Honda CRX Fav Mod: CRXForum Class:	Thanks for the comments guys.. there is an insane amount of time that goes into these projects - it's nice to hear. Punch Die cutting paper dont think the video was working.. but it's fixed now.. ------------------ 2.2L Turbo CRX - 10.73 @ 137mph - Pump gas, and then drove it home.

08-13-2005, 04:04 PM	#6 (permalink)
fixitmattman My Neon made me a mechanic Posts: 2,618 Location: Brantford / Thunder Bay Join Date: May 2004 Ride: 00 Neon Fav Mod: Class:	LMAO at Brandon Owned by no mig welder. That arc welder is a monster :tounge: #1 reason we used my mig for the Baja. Welds look good enough considering. All ready for Wednesday I take it. Matt ------------------ This is where you type a bunch of shit about how awesome your car is. FACT: It's been scientifically proven that the more shit you write in here the less cool your car is. Nine times out of ten the majority of people who talk shit down here don't even have any of the crap they talk about on their car. I drive an 8 year old domestic and barely give two shits about it. I beat the hell out of it and it begs for more, just like your girlfriend. Go ahead, cut me off. I dare ya.

08-13-2005, 07:41 PM	#7 (permalink)
RINdetails77 VM Member Posts: 1,334 Location: Small crt. Cambridge Join Date: Jun 2005 Ride: 1994 Pontiac Grand AM Fav Mod: Class:	THATS SICK :O ------------------ Ryan G. Performance Details 138 Chestnut, Unit 2 242 6479 '94 Grand AM Aniversary Edition - Amythest

08-14-2005, 01:23 AM	#9 (permalink)
Slawek VM Member Posts: 4,480 Location: Sydney, Australia Join Date: Jul 2004 Ride: 1998 VW Golf CL Fav Mod: Class: Street	i did the yo-yo assembly and packaging project in 03' ------------------ --- Down Under ---

08-15-2005, 02:06 PM	#11 (permalink)
neonSRT VM Moderator Posts: 12,178 Location: Guelph Join Date: Nov 2003 Ride: 91 VW GTI Fav Mod: Azenis RT615's Class: Street	Looks awesome Paul! ------------------ Roses are #FF0000 Violets are #0000FF All my base are belong to you.

08-15-2005, 02:18 PM	#12 (permalink)
Slawek VM Member Posts: 4,480 Location: Sydney, Australia Join Date: Jul 2004 Ride: 1998 VW Golf CL Fav Mod: Class: Street	honestly, no pics. But I have the finished product at home As well as the finished products of the other two groups (CD packaging - lame, and film packaging - lame). Seems like everyone "packages" shit, rather than an assembly process. Boo to you, packagers, boo to you. ------------------ --- Down Under ---

08-27-2005, 02:45 AM	#13 (permalink)
2point2 VM Member Posts: 6,508 Join Date: Feb 2004 Ride: 1988 Honda CRX Fav Mod: CRXForum Class:	http://www.conestogac.on.ca/met/ra/robotics2005 check out the website..^^ ------------------ 2.2L Turbo CRX - 10.73 @ 137mph - Pump gas, and then drove it home.

08-27-2005, 08:00 PM	#14 (permalink)
khunt0012 VM Member Posts: 2,378 Location: At the Bar Join Date: Dec 2004 Ride: 1994 Honda Accord / 1991 Honda Civic Si Fav Mod: H22 Swap Class: Street	Real cool Paul, keep up the good work. I'm going into to D&A this year but I may switch over to R&A depending on how I like it. I think a group did a pill packaging plant one year that I saw. ------------------ Kyle 1994 Honda Accord EX H22 - Summer 1991 Honda Civic Si - Winter

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode