|
 
         |
03-14-2008, 09:07 AM
|
#1 (permalink) |
|
VM Member
Posts: 75
Location: C-Bridge
Join Date: Mar 2005
Ride: 2002 Acura RSX-S
Fav Mod: TSW's Class: Street |
Cross drilled rotors...
Does anyone know if cross drilled rotors can be machined? If so, where is a good place to get mine done in the Cambridge area? I'm pretty sure one of them needs done, even though they're less than a year old.
My mechanic said that they can't be machined (I think he's just trying to sell me a new set of rotors) and he was going to charge me quite a bit of money just to take one of them off to check it out. Where's a good brake place that I can take my car to at least have someone tell me what's making the noise in the first place... |
|
|
|
03-14-2008, 06:39 PM
|
#2 (permalink) |
|
VM Member
Posts: 2,761
Location: London & K/W
Join Date: Apr 2005
Ride: '95 Civic Sedan
Fav Mod: enjoying the stockness. Class: Street |
rotors shouldn't really be making a noise... what kind of noise is it?
------------------ Brendan: Bunch of 240s Some Opels And a Honda |
|
|
|
|
03-14-2008, 08:22 PM
|
#3 (permalink) |
|
VM Member
Posts: 75
Location: C-Bridge
Join Date: Mar 2005
Ride: 2002 Acura RSX-S
Fav Mod: TSW's Class: Street |
I was told that it's probably the pads weren't installed properly.
So do you know if drilled rotors can be machined? And where in the Cambridge area is a good place for brake work? |
|
|
|
|
03-15-2008, 12:20 AM
|
#4 (permalink) |
|
My Neon made me a mechanic
Posts: 2,617
Location: Brantford / Thunder Bay
Join Date: May 2004
Ride: 00 Neon
Fav Mod: Class: |
What pads are you running? Some pads are just plain noisy to begin with.
------------------ This is where you type a bunch of shit about how awesome your car is. FACT: It's been scientifically proven that the more shit you write in here the less cool your car is. Nine times out of ten the majority of people who talk shit down here don't even have any of the crap they talk about on their car. I drive an 8 year old domestic and barely give two shits about it. I beat the hell out of it and it begs for more, just like your girlfriend. Go ahead, cut me off. I dare ya. |
|
|
|
|
03-15-2008, 10:55 AM
|
#5 (permalink) |
|
VM Member
Posts: 75
Location: C-Bridge
Join Date: Mar 2005
Ride: 2002 Acura RSX-S
Fav Mod: TSW's Class: Street |
I don't remember what kind of pads they are. I do know that this clicking sounds coming from only the front drivers side brake shouldn't be happening...
So does ANYONE know if cross drilled rotors can be machined? And where in the Cambridge area is a good place for brake work? |
|
|
|
|
03-15-2008, 12:32 PM
|
#6 (permalink) |
|
My Neon made me a mechanic
Posts: 2,617
Location: Brantford / Thunder Bay
Join Date: May 2004
Ride: 00 Neon
Fav Mod: Class: |
Yes the can be turned just like a regular rotor.
Sounds like you've got problems other than the rotor. Take it to whoever you like from the sticky in the Local Shop Talk forum. ------------------ This is where you type a bunch of shit about how awesome your car is. FACT: It's been scientifically proven that the more shit you write in here the less cool your car is. Nine times out of ten the majority of people who talk shit down here don't even have any of the crap they talk about on their car. I drive an 8 year old domestic and barely give two shits about it. I beat the hell out of it and it begs for more, just like your girlfriend. Go ahead, cut me off. I dare ya. |
|
|
|
|
03-15-2008, 01:54 PM
|
#7 (permalink) |
|
VM Moderator
Posts: 12,178
Location: Guelph
Join Date: Nov 2003
Ride: 91 VW GTI
Fav Mod: Azenis RT615's Class: Street |
A clicking from a corner can also be a failing wheel bearing...
------------------ Roses are #FF0000 Violets are #0000FF All my base are belong to you. |
|
|
|
|
03-16-2008, 07:53 AM
|
#8 (permalink) | |
|
VM Member
Posts: 2,918
Location: Kitchener
Join Date: Dec 2003
Ride: 1985 Pontiac Fiero
Fav Mod: Lowering springs Class: Street |
Quote:
To see if it is the wheel bearing do this test. Rasie the car and seeing how it is front wheel problems and front wheel drive put it in N. Spin the wheel and feel the spring for very bad vibration/grinding. Check the other side as well to compare. If they are vibrating like crazy then more then likely it is the wheel bearing. As for the turning down the rotors, as long as it is now past the point (not sure what the measurement is) then you can get them machined, but, for the price of rotors, you might as well just get new ones. ------------------ <Kevin> 1995 Chevy Cavalier- RIP??? 2003 Chevy Trailblazer LT EXT- Daily Driver 1985 Pontiac Fiero GT Fastback- New toy Last edited by NightHawk; 03-16-2008 at 07:55 AM. Reason: adding more info |
|
|
|
|
|
03-16-2008, 10:27 AM
|
#9 (permalink) | |
|
VM Member
Posts: 837
Location: K-W/Wasaga
Join Date: Jun 2004
Ride: 1989 USDM Silvia --1995 240SX (Kouki converted)
Fav Mod: SR20DET or Z32 brakes Class: Street |
Quote:
------------------ SR20DET Tuned by BLITZ Yeah thats right, BLITZ MA-F@CK@ I didn't get the nicky HARDCORE for nothing |
|
|
|
|
  |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
