ECOTEC install complete - #1 Car Club In Kitchener - Waterloo - Cambridge

**VIPERREDZED** · 03-10-2008, 12:57 AM

ECOTEC IS IN WOOOO

New Tires

Ecotec RUNS and is all wired.

**crxforum** · 03-10-2008, 02:31 AM

Looking good. You have any plans for this car other than the motor swap? Going to drag race it or just keep it as a daily?

CRX Forum

**VIPERREDZED** · 03-10-2008, 09:43 AM

It will be getting lowered within the next month just because J-bodys sit up WAY to high stock.

i will also get a Short throw shifter, air intake, and polyurathane engine mounts, tranny mounts, and control arm bushings.

and yes i will race it a bit but it will be my Daily

**ef9** · 03-10-2008, 01:12 PM

what is that engine from? what kind of numbers does it push? im unfamilier with sunfires, sounds like it would be a hybrid although i know its not

**VIPERREDZED** · 03-10-2008, 03:13 PM

its a 2.2l ecotec. the one i installed is from a 2004 Cavalier.

2.2 ecotec comes in pursuits, cobalts, G6 base, Saturn IONs.

2003-2005 Cavaliers and sunfires also

its 140hp 145ftlbs the 2.4 i took out was 150hp. 155ftlbs,

the ecotec is ALOT lighter as its is a aluminum block with Steel sleaves where the 2.4 had a cast iron block still

**NikiterZts** · 03-11-2008, 07:32 AM

^^ sounds like you're making 2.2L engine look better then 2.4L.......am i understanding this right?

**fixitmattman** · 03-11-2008, 12:02 PM

He doesn't need to make it look better, it is.

I bet the 2.2 has a much broader power curve as well.

Man that stock fuel rail is massive for stock

I'll have to keep that in mind.

**BLKGSR** · 03-11-2008, 12:19 PM

Quote:

Originally Posted by VIPERREDZED

polyurathane engine mounts, tranny mounts, and control arm bushings.

so... why didn't you do this when you had the engine out?

**VIPERREDZED** · 03-11-2008, 12:39 PM

^^ its not alot of work in the sunfire to do that. and i needed it on the road ASAP so stuff like that can wait.

but 13 hours total time invested in the swap. saftied today on the road tommorow

and yeah the 2.2 is alot better than the 2.4 the 2.4s always blow up like the one that was in this car lol #3 Rod bearing.

03-10-2008, 12:57 AM	#1 (permalink)
VIPERREDZED VM Member Posts: 1,858 Location: London, ON Join Date: Aug 2004 Ride: 1999 Buick Century Fav Mod: Buying my 72 Chev Nova Class: Strip	ECOTEC install complete ECOTEC IS IN WOOOO New Tires Ecotec RUNS and is all wired. ------------------ 1996 Viper Red Cavalier Z24 15.116@90.95 What do i know I'm just another J-Body Owner

03-10-2008, 02:31 AM	#2 (permalink)
crxforum VM Administrator Posts: 3,336 Location: Kitchener Join Date: Feb 2005 Ride: 1990 Honda CR-X SiR Fav Mod: Ninterior Class: Street	Looking good. You have any plans for this car other than the motor swap? Going to drag race it or just keep it as a daily? CRX Forum ------------------ Honda CR-X If you need it I can get it.

03-10-2008, 09:43 AM	#3 (permalink)
VIPERREDZED VM Member Posts: 1,858 Location: London, ON Join Date: Aug 2004 Ride: 1999 Buick Century Fav Mod: Buying my 72 Chev Nova Class: Strip	It will be getting lowered within the next month just because J-bodys sit up WAY to high stock. i will also get a Short throw shifter, air intake, and polyurathane engine mounts, tranny mounts, and control arm bushings. and yes i will race it a bit but it will be my Daily ------------------ 1996 Viper Red Cavalier Z24 15.116@90.95 What do i know I'm just another J-Body Owner

03-10-2008, 01:12 PM	#4 (permalink)
ef9 VM Member Posts: 1,433 Location: Waterloo Join Date: Aug 2005 Ride: 2002 Dodge Ram Fav Mod: Class:	what is that engine from? what kind of numbers does it push? im unfamilier with sunfires, sounds like it would be a hybrid although i know its not ------------------ Kev 2002 Dodge Ram 1500 5.9L 94' Jeep YJ 2" lift, 31" mudders 93 eg hatch SOLD 91 EF hatch, b16 swap SOLD 99 acura el 1.6L sohc vtec RIP

03-10-2008, 03:13 PM	#5 (permalink)
VIPERREDZED VM Member Posts: 1,858 Location: London, ON Join Date: Aug 2004 Ride: 1999 Buick Century Fav Mod: Buying my 72 Chev Nova Class: Strip	its a 2.2l ecotec. the one i installed is from a 2004 Cavalier. 2.2 ecotec comes in pursuits, cobalts, G6 base, Saturn IONs. 2003-2005 Cavaliers and sunfires also its 140hp 145ftlbs the 2.4 i took out was 150hp. 155ftlbs, the ecotec is ALOT lighter as its is a aluminum block with Steel sleaves where the 2.4 had a cast iron block still ------------------ 1996 Viper Red Cavalier Z24 15.116@90.95 What do i know I'm just another J-Body Owner

03-11-2008, 07:32 AM	#6 (permalink)
NikiterZts VM Member Posts: 1,023 Location: Kitchener Join Date: Dec 2006 Ride: 2002 Ford Focus ZTS Fav Mod: full exhaust Class: Street	^^ sounds like you're making 2.2L engine look better then 2.4L.......am i understanding this right? ------------------ White Folks Gangstaz and The Thugz [Ay Bay Bay]

03-11-2008, 12:02 PM	#7 (permalink)
fixitmattman My Neon made me a mechanic Posts: 2,608 Location: Brantford / Thunder Bay Join Date: May 2004 Ride: 00 Neon Fav Mod: Class:	He doesn't need to make it look better, it is. I bet the 2.2 has a much broader power curve as well. Man that stock fuel rail is massive for stock I'll have to keep that in mind. ------------------ This is where you type a bunch of shit about how awesome your car is. FACT: It's been scientifically proven that the more shit you write in here the less cool your car is. Nine times out of ten the majority of people who talk shit down here don't even have any of the crap they talk about on their car. I drive an 8 year old domestic and barely give two shits about it. I beat the hell out of it and it begs for more, just like your girlfriend. Go ahead, cut me off. I dare ya.

03-11-2008, 12:39 PM	#9 (permalink)
VIPERREDZED VM Member Posts: 1,858 Location: London, ON Join Date: Aug 2004 Ride: 1999 Buick Century Fav Mod: Buying my 72 Chev Nova Class: Strip	^^ its not alot of work in the sunfire to do that. and i needed it on the road ASAP so stuff like that can wait. but 13 hours total time invested in the swap. saftied today on the road tommorow and yeah the 2.2 is alot better than the 2.4 the 2.4s always blow up like the one that was in this car lol #3 Rod bearing. ------------------ 1996 Viper Red Cavalier Z24 15.116@90.95 What do i know I'm just another J-Body Owner

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode